Not always. Ask for separate design, prototype, production-tooling and trial scopes.
Packaging Materials
Before the Mold Invoice: PauPack Explains Glass Bottle Mold Price
Posted by PauPack OnAug 18 2026
Featured Blogs
Request for Free Samples
Featured Blogs
Cobalt Blue Glass UV Protection: A Measured Guide | PauPack
PauPack compares cobalt blue glass UV protection with amber and clear glass band by band, and sets out the sample-room light test that decides the colour for your oil.
Packaging AQL Sampling Plan: Sizes and Limits | PauPack
PauPack explains how to build a packaging AQL sampling plan: lot definition, code letters, defect classes, switching rules and the functional tests to run alongside.
Dropper Cap Types: Fit, Dose and Material | PauPack
PauPack compares the four dropper cap types in commercial use, the neck finish numbers that decide fit, dose per drop and the tests run before production.
Bottle Minimum Order Quantity: Five Dials | PauPack
PauPack breaks bottle minimum order quantity into five cost drivers, works one bottle through three volumes, and lists the lines to check before confirming an order.
Packaging Prototype Process: 7 Gates to Tooling | PauPack
PauPack sets out the packaging prototype process as seven gates, from drawing review and material choice to look-like models, filled samples, tooling, trial production and handover.
Skincare Container Options: Choose by Formula | PauPack
PauPack explains how to narrow skincare container options by formula viscosity, dose control, compatibility testing, fill line constraints and landed cost.
